How to Propagate Monstera?

Have you ever seen a Monstera plant and thought to yourself, “I need one of those in my life”? Well, you’re in luck! Not only are they relatively easy to care for, but they’re also very easy to propagate.

In this article, we’ll show you how to propagate your own Monstera plants so that you can have as many as you want! Monstera plants are native to tropical rainforests, so they’re used to being in warm, humid environments. Because of this, they’re not the best plants for indoor propagation.

However, if you live in a warm climate or have a greenhouse, propagating monsteras indoors is perfectly fine.

  • Fill a pot with well-draining, rich potting mix
  • Saturate the mix with water and allow it to drain completely before planting
  • Cut a 6-8 inch section of stem from a healthy Monstera plant, just below a node (where the leaves attach to the stem)
  • Remove all but two or three leaves from the cutting and dip the cut end into rooting hormone powder
  • Insert the cutting about 2 inches deep into the potting mix, making sure that at least one leaf is above soil level
  • Water thoroughly and place in a warm, humid location out of direct sunlight until new growth appears and roots have formed (this could take several weeks)



Can I Propagate a Monstera Leaf?

Yes, you can propagate a Monstera leaf! Here are a few methods: 1. Leaf-Bud Cuttings: Cut a healthy leaf from the plant, making sure to include at least 2-3 nodes (the little bumps on the stem where leaves emerge).

Place the cutting in water and wait for roots to form. Once roots have formed, you can pot up your new plant. 2. Rooted Node Cuttings: Cut a section of stem that includes 1-2 nodes and some root growth.

Plant this in soil and keep moist until new growth appears. 3. Layering: This method works best with larger Monstera plants. Simply bend a low-hanging branch down to the ground and bury a portion of it in soil.

Can You Propagate Monstera in Just Water?

Yes, you can propagate Monstera in just water. The process is called hydroponics and it is a method of growing plants without soil. All you need is a container, some water and a little bit of patience.

To get started, fill your container with water and add a small amount of fertilizer. Then, take a cutting from your Monstera plant and remove the lower leaves. Place the cutting in the water and wait for roots to form.

This can take anywhere from a few days to a few weeks. Once the roots have formed, you can transplant your cutting into soil or continue to grow it hydroponically. If you choose to grow it hydroponically, you will need to change the water every week or so and add more fertilizer as needed.

With proper care, your Monstera plant will thrive whether grown in soil or water!

Is It Better to Propagate Monstera in Water Or Soil?

There are benefits to propagating Monstera in both water and soil. Water propagation is typically faster and easier, but it does come with some risks. Soil propagation takes longer but can be more forgiving if you make a mistake.

Water Propagation Water propagation is the process of growing new plants from cuttings in water. This method is often used because it is fast and easy, plus you can see the roots developing which is fun and satisfying.

However, there are a few things to keep in mind when propagating Monstera in water.

You May Also Like:  How to Get Grass to Grow in Clay Soil?
First, your cutting will need to have at least one node (the bump where leaves attach to the stem). This is important because the roots will grow from the nodes.

If your cutting doesn’t have any nodes, it’s unlikely to root successfully. Second, it’s important to use clean, filtered water for your Monstera cutting. Tap water can contain chemicals that can harm or even kill your plant.

Third, you’ll need to change the water regularly to prevent bacteria and fungus from build-up which can also harm your plant. Finally, be sure not to let your plant sit in direct sunlight as this can cause leaf scorch or sunburns. Overall, water propagation is a great way to propagate Monstera but there are a few things you need to keep in mind to ensure success.

Soil Propagation Soil propagation is the process of growing new plants from cuttings in potting mix or soil . Unlike water propagation , this method takes longer because roots need time to develop before they can start taking up nutrients from soil .

But this method has its own set of benefits too! For starters , soil holds moisture better than air so your plant won’t dry out as quickly .

How Long Does It Take for Monstera Cuttings to Root?

It typically takes around two to four weeks for Monstera cuttings to develop a good root system. The time frame can vary somewhat depending on the variety of Monstera, the time of year, and growing conditions. For example, cuttings taken from young plants will usually root more quickly than those taken from older ones.

Also, cuttings taken during the spring and summer months tend to develop roots faster than those taken in fall or winter.

How to Propagate Monstera?


How to Propagate Monstera With Pictures

If you’re looking to add a little bit of tropical flair to your indoor space, propagation is a great way to do it! Monstera plants are especially popular right now, and they’re relatively easy to propagate. Here’s a step-by-step guide on how to do it, with pictures!

1. Start by finding a healthy monstera plant that you want to use for your cutting. Make sure that the stem you choose is at least 6 inches long and that there are several leaves attached. 2. Cut the stem just below one of the leaves, making sure that your cutting includes a portion of the stem with nodes (this is where new roots will grow).

3. Fill a pot or other container with fresh, well-draining potting mix. Stick your cutting into the mix, making sure that the node is buried beneath the surface. 4. Water your cutting well and place it in a warm, bright spot out of direct sunlight.

Keep an eye on it over the next few weeks as it begins to sprout new roots and leaves!

How to Propagate Monstera Adansonii

If you’re looking for an easy-to-care-for houseplant with interesting leaves, look no further than the Monstera adansonii. Also known as the Swiss cheese plant or split-leaf philodendron, this fast-growing plant is perfect for beginners. And best of all, it’s easy to propagate!

Here’s everything you need to know about propagating monstera adansonii. Monstera adansonii is a tropical evergreen vine that can grow up to 20 feet in its native habitat of Central and South America. The leaves are what give this plant its unique “swiss cheese” appearance, with large holes or fenestrations (windows) that help the plant survive in humid environments by allowing excess water to escape.

You May Also Like:  What Do Coneflower Seeds Look Like?

The first step in propagating monstera adansonii is to choose a healthy stem with at least two nodes (the points where leaves attach to the stem). Cut the stem just below a node using a sharp knife or garden shears. Next, remove any lower leaves from the stem so that you’re left with 2-3 inches of bare stem.

It’s important to make sure that the cut surface is nice and clean before proceeding. Now it’s time to get your propagation station set up! You’ll need a pot filled with well-draining potting mix, some pebbles or stones, and a plastic baggie large enough to fit over the pot (this will create a mini greenhouse effect and help keep humidity levels high).

Make sure your chosen pot has drainage holes in the bottom. Once your propagation station is ready, it’s time to insert your cutting. Gently push the cut end of the stem into the potting mix until it’s buried up to the first node.

Then, water lightly until moist but not soggy. Covering your pot with the plastic baggie will help maintain moisture levels while roots begin to form (usually within 2 weeks). To care for your newly propagated monstera adansonii, place it in an area with bright indirect light and keep an eye on soil moisture levels – letting things dry out too much will cause leaf drop, but keeping things too wet will lead to root rot.

How to Propagate Monstera Leaf

If you’re looking to add a tropical touch to your home, propagation is a great way to get more plants for free. Monstera leaves are especially popular right now, and they’re surprisingly easy to propagate. With just a few supplies and some patience, you can have new monstera plants in no time.

Here’s what you’ll need: -One healthy monstera leaf -A clean, sharp knife

-A small pot or container filled with sterile potting mix -Water Start by carefully cutting a stem from a healthy monstera plant.

The stem should be about 6 inches long and have at least 2 nodes (the raised bumps where leaves attach). Use a clean, sharp knife to make the cut so that the stem doesn’t tear. Next, insert the cut end of the stem into your pot or container of sterile potting mix.

Make sure that at least one node is buried beneath the surface of the mix. Water well and place in a bright spot out of direct sunlight. Keep the soil moist but not soggy, and in 4-6 weeks you should see new roots beginning to form.

Once the roots are established, you can transfer your new plant to a larger pot if desired. Congratulations – you’ve successfully propagated a monstera leaf!


In order to propagate your Monstera, you will need to find a stem that has at least two nodes. Cut the stem below the second node and make sure that your cutting tool is sharp so that you can get a clean cut. You will then need to place the cutting in water and change the water every few days.

After a few weeks, you should see roots begin to grow. Once the roots are about an inch long, you can then plant them in soil.