How to Prune Norfolk Pine?

Prune Norfolk pines in late winter or early spring, before new growth begins. Cut back any branches that are growing outside the desired shape of the plant, as well as any damaged or diseased branches. Make cuts at a 45-degree angle just above a node (the point where leaves attach to the stem).

  • Norfolk pines can be pruned at any time of year, although the best time is late winter or early spring
  • Cut back any branches that are dead, dying, or diseased
  • These can be identified by their dry, brown appearance
  • Also remove any branches that are crossing over each other or growing inward toward the center of the tree
  • When making cuts, always angle them slightly so that water will run off them and not pool around the wound
  • Finally, thin out the canopy to allow more light and air to reach the inner parts of the tree

Norfolk Island Pine / Araucaria heterophylla : Care, Pruning and lots of tips & tricks!

Can I Cut the Top off a Norfolk Pine?

A Norfolk pine (Araucaria heterophylla) is a type of evergreen tree that is native to Norfolk Island, an island in the South Pacific. The Norfolk pine has a straight trunk and branches that grow in a spiral pattern. The tree can grow to be over 100 feet tall.

The leaves of the Norfolk pine are narrow and sharp-pointed. The tree produces cones that are 3-4 inches long. The cones contain seeds that are edible.

The wood of the Norfolk pine is soft and easy to work with. It is often used for making furniture and crafts. You can cut the top off a Norfolk pine, but it is not recommended as it will ruin the shape of the tree.

How Do You Shape a Norfolk Island Pine?

If you want to shape a Norfolk Island pine, also known as Araucaria heterophylla, into a specific form, it’s best to do so when the tree is young. Once the tree has reached maturity, it becomes much more difficult to change its shape. When shaping a young Norfolk Island pine, start by selecting a main branch that will serve as the trunk of your tree.

Then, remove any side branches that are growing from this main branch. Once you have your trunk established, you can begin trimming the tips of the branches to create the desired shape for your tree. It’s important to make sure that you don’t cut too much off of any one branch, as this can damage the tree.

If you’re not sure how much to trim off, it’s always better to err on the side of caution and take less off than you think you need to. With patience and care, you can successfully shape a beautiful Norfolk Island pine into any form you desire!

You May Also Like:  How to Transplant a Palm Tree?

How Do You Prune a Norfolk Pine Indoors?

Pruning a Norfolk pine indoors is a bit different than pruning other types of trees. For one, you’ll want to be extra careful not to damage the tree’s bark. Secondly, you’ll need to use sharp, clean pruning shears.

And finally, you should only remove dead or dying branches – don’t try to shape the tree by pruning off live branches. Here’s a step-by-step guide to indoor Norfolk pine pruning: 1. Inspect the tree for any dead or dying branches.

These are the only ones that should be removed. 2. Using sharp, clean pruning shears, cut the branch at its base, as close to the trunk as possible. 3. Be careful not to damage the bark while cutting or removing branches.

4. Repeat steps 1-3 until all dead or dying branches have been removed from the tree.

Do Norfolk Pine Branches Grow Back?

Norfolk pine branches are known for their resilience and ability to grow back after being cut. In fact, many people use Norfolk pines as Bonsai trees precisely because they can be trimmed and shaped so easily. If you do need to trim your Norfolk pine, don’t worry – the branches will almost certainly grow back.

Just make sure that you cut them at a 45 degree angle, as this will help the tree to heal more quickly.

How to Prune Norfolk Pine?


How to Save a Dying Norfolk Island Pine

Norfolk Island pines are beautiful, stately trees that make a wonderful addition to any home. But sometimes, despite our best efforts, they can begin to decline. If you notice your Norfolk Island pine starting to yellow or drop needles, it’s important to take action quickly to try to save it.

Here are some tips for saving a dying Norfolk Island pine: 1. First, check the tree’s soil. Norfolk Island pines need well-drained, acidic soil in order to thrive.

If the tree is in poorly drained or alkaline soil, this could be causing its decline. Amending the soil with compost or sulfur can help correct this problem.

You May Also Like:  Why is My Jade Plant Dying?
2. Make sure the tree is getting enough water.

Norfolk Island pines need regular watering, especially during hot weather. The root ball should be kept moist but not soggy – too much water can also cause problems for these trees. 3. Provide the tree with adequate nutrients by fertilizing it twice a year with an acid-based fertilizer formulated for evergreens.

Be careful not to over-fertilize, as this can actually harm the tree more than help it! 4. Protect the tree from winter cold and drying winds by wrapping it in burlap or placing it in a sheltered location such as against a south-facing wall or under an eaves trough .5 Take care not to damage the trunk when wrapping or moving the tree .6 Also avoid pruning Norfolk Island pines during late fall and winter , as this can promote new growth that is susceptible to frost damage .7 Winter protection is especially important for young trees .8 Once established , however , mature Norfolk Island pines are quite tolerant of cold weather .9 They may even survive temperatures as low as 0 degrees Fahrenheit !10 So if you live in an area with harsh winters , don’t despair – yourtree may still have a chance .11 Just be sure to give it some extra TLC during these months .12 With proper care , your dying Norfolk Island pine can be saved !


Pruning Norfolk pine is an important part of keeping this popular houseplant healthy. While you can prune Norfolk pines at any time of year, the best time to do it is in late winter or early spring. To prune your Norfolk pine, start by removing any dead, diseased, or damaged branches.

Next, cut back any branches that are growing out of bounds or crossing over other branches. Finally, trim back any long and leggy branches to encourage new growth.