How to Change Trimmer Line on Ryobi Expand It?

To change the trimmer line on a Ryobi Expand-It, first remove the cap at the end of the trimmer shaft. Next, unscrew the spool retainer and pull out the old spool of line. Wrap the new spool of line around the Retainer and screw it back on.

Finally, reattach the end cap to the shaft.

  • Insert the new trimmer line into the head of the Ryobi Expand-It trimmer
  • Cut off any excess trimmer line with a pair of scissors, so that only about 6 inches is protruding from the head
  • Pull on the end of the trimmer line to extend it out from the head, then cut it at a 45 degree angle
  • Line up one of the notches on the trimmer head with the hole in the spool, then insert and push in the trimmer line until it locks into place
  • Repeat this step for the other side
  • Wind the trimmer line around the spool in a clockwise direction, being sure to leave about 6 inches sticking out from one side
  • Once you have reached the end, cut off any excess and tuck it into one ofthe notches onthe spool soit doesn’t come loose while you’re trimming
How to Change Trimmer Line on Ryobi Expand It?

Credit: machinelounge.com

How Do You Change the String on a Ryobi Expand It?

If you need to change the string on your Ryobi expand it, there are a few things you need to do. First, make sure that you have the correct replacement string for your model of expand it. You can find this information in the owner’s manual or online.

Once you have the correct string, remove the old string from the expand it by unscrewing the retaining knob and pulling out the old string. Then, thread the new string through the device, starting at the bottom and working your way up. Make sure that you leave enough slack so that you can easily pull out the new string when you need to replace it again.

When you reach the top of the device, screw on the retaining knob to secure the new string in place.

You May Also Like:  What Does a Basswood Tree Look Like?

How Do You Change the Trimmer Line on a Ryobi Electric Trimmer?

If you need to change the trimmer line on your Ryobi electric trimmer, there are a few things that you will need to do. First, you will need to remove the spool from the trimmer. To do this, you will need to locate the release button on the spool.

Once you have found the release button, press it and then pull the spool out of the trimmer. Next, you will need to cut off a length of new trimmer line that is about two feet long. Once you have done this, thread one end of the new line through the eyelet on the spool and then wind it around the spool a few times.

After you have done this, insert the spool back into the trimmer. Finally, you will need to reattach any covers or guards that were removed when taking out the old line. Once everything is back in place, turn on your trimmer and test it out.

If everything is working properly, then congratulations! You have successfully changedthe trimmer line on your Ryobi electric trimmer!

How Do You Reload a Ryobi Trimmer Line?

If you have a Ryobi trimmer, you know that it’s a great tool for keeping your lawn looking neat and tidy. But like any tool, it needs to be properly maintained in order to function at its best. One important part of maintaining your Ryobi trimmer is making sure the trimmer line is always in good condition.

Fortunately, reloading the trimmer line is a relatively easy process. Here’s how to do it: 1. Start by removing the old trimmer line from the spool.

To do this, simply unscrew the spool cap and pull out the old line. 2. Cut off a length of new trimmer line that is about twice as long as the old line.

You May Also Like:  Why Aren'T My Encore Azaleas Blooming?
3. Feed one end of the new line through the eyelet on the spool (this is where the old line was fed through).

Then, wind the new line around the spool in a clockwise direction until there are about six inches left. 4. Take the end of the new line and feed it through the slot in the spool cap (again, this is wherethe oldline was fed through). Finally, screw onthe spoolcap tight enough so thatit doesn’t come loose, but don’t overtighten it or you may stripthe threads.

How Do I Change the Head on My Ryobi Expand It Trimmer?

If you need to change the head on your Ryobi expand it trimmer, follow these steps: 1. Disconnect the trimmer from the power source. 2. Remove the spool cap from the trimmer head and untwist the bump knob counterclockwise to release it.

3. Pull out the old cutting line from the spool and discard it. 4. Cut a new length of cutting line that is about 3 feet long and insert one end into the eyelet on the spool. Wrap the line around the spool a few times, making sure that it is tight against itself so it doesn’t come loose while you’re using the trimmer.

5. Insert the other end of the cutting line into the second eyelet on the spool, then pull on both ends of the line to tighten it up before insertingthe bump knob and tightening it clockwise by hand until it is snug. Be careful not to overtighten as this can damagethe trimmer head.

How to Restring the Ryobi Expand-It Trimmer | Easy Trimmer Restring

Conclusion

In this blog post, the author details how to change the trimmer line on a Ryobi Expand It. The author begins by noting that it is important to use the correct size and type of trimmer line for your Ryobi Expand It model. They then provide detailed instructions on how to remove the old trimmer line and replace it with new trimmer line.

Finally, they offer some helpful tips on how to avoid common mistakes when changing trimmer line.