How to Remove Glued Mirror: Quick and Easy Methods.

To remove a glued mirror, use a scraper or putty knife to loosen the glue and gently pry the mirror off the wall. Now, removing a glued mirror can be a daunting task, especially if you are not equipped with the proper tools or techniques.

However, with a bit of patience and some elbow grease, you can remove a glued mirror without damaging the wall or cracking the mirror. In this article, we will cover step-by-step instructions on how to safely and efficiently remove a glued mirror from any surface.

From choosing the right tools to handling the mirror, we will provide you with all the information you need to successfully remove that stubborn mirror.

How to Remove Glued Mirror: Quick and Easy Methods.


Materials Required

There are several materials you will need to remove a glued mirror effectively and efficiently. First, safety goggles and gloves are a must to avoid any potential hazards. Next, a hammer and a chisel are necessary to gently pry the mirror from the wall.

You will also need a razor scraper to remove any adhesive left on the surface. Acetone or vinegar, a scraper or sandpaper, and a cleaning solution will be needed to prep the area for a new mirror installation or to leave it as is.

Finally, a drop cloth is vital to protect the floor during the process. With these materials, you can safely and easily remove a glued mirror without damaging the wall or injuring yourself. Remember to always take precautions and wear protective gear when handling glass and adhesives.

Method 1: Using A Hairdryer

One of the quick and easy ways to remove glued mirrors is by using a hairdryer. First, turn on your hairdryer and hold it a few inches away from the glued edges of the mirror. Slowly heat the glue for a minute or two, making sure not to overheat it.

You May Also Like:  Mastering the Art of Grouting Uneven Tile: Tips and Tricks

Then, use a thin and flat knife to lift the edges of the mirror and slowly peel it away from the surface. The benefits of this method include minimal damage to the wall or surface and ease of use at home.

However, it may not be effective for large mirrors or stubborn glue. Remember to clean the remaining glue with a gentle solvent and a clean cloth.

Method 2: Using Wd-40

Using wd-40 is another effective and popular method for removing glued mirrors. Firstly, clean the frame and mirror with soap and water to get rid of any dirt or residue. Then, apply a generous amount of wd-40 to the edges of the mirror with a spray bottle.

Allow it to sit for 15 to 20 minutes, then use a plastic scraper to gently pry the mirror off. Repeat the process until the mirror is fully removed. One of the benefits of using wd-40 is that it’s readily available and affordable.

However, it may not work as well for larger mirrors or mirrors that are deeply glued.

Method 3: Using A Wire

Using a wire to remove glued mirrors is a quick and easy method. Begin by cutting a long piece of wire and then bend one end into a hook. Insert the hooked end behind the mirror and carefully start pulling the wire towards you.

The adhesive should begin to loosen. Continue to pull the wire back and forth until the mirror is completely removed. A major benefit of this method is that it does not damage the wall or the mirror. On the downside, a wire may be difficult to manipulate.

It may also require more effort than other methods. Nonetheless, it remains an accessible option for diy enthusiasts.

Method 4: Using A Utility Knife

Using a utility knife is a common yet tricky method for removing a glued mirror. First, protect yourself with gloves and goggles to prevent injuries. Then, locate the glue’s spots and slowly cut through the adhesive with the blade. Keep the knife away from the surface of the mirror to prevent scratching or cracking.

You May Also Like:  Where to Buy Wood for Fire Pit? Best Places Revealed!

Once you’ve cut through all spots, gently pry the mirror away from the wall, being careful not to apply too much pressure. As with any method, there are pros and cons. The utility knife method is quick and straightforward, but it requires steady hands and patience.

It’s also not ideal for larger mirrors, as it may be challenging to locate all the adhesive spots.

Method 5: Using A Commercial Adhesive Remover

Using a commercial adhesive remover is a simple and efficient method for removing glued mirrors. First, gather all the necessary tools including gloves, a scraper, and the adhesive remover. Apply the adhesive remover generously to the mirror and let it sit for the recommended amount of time.

Use the scraper to carefully remove the mirror, taking care not to damage the wall. One of the benefits of this method is that it requires minimal effort, as the adhesive remover does most of the work. However, it may not be as effective on stubborn adhesives and can also be harmful if not used properly.

Overall, this is a great option for those looking for a quick and easy solution to removing glued mirrors.

Safety Precautions

When removing a glued mirror, safety should be the utmost priority. Here are some crucial safety precautions to take to avoid injuries and accidents. First, wear gloves and safety goggles to protect your hands and eyes. Second, avoid using excessive force or sharp objects that could break the mirror and cause injury.

Third, make sure the area around the mirror is clean and clear to avoid tripping while working. Fourth, work with someone else to help support the mirror during removal. Fifth, turn off any power sources or lighting fixtures in the area.

And lastly, dispose of the mirror carefully and properly to avoid injury to yourself or others. By taking these precautions, you can remove a glued mirror safely and efficiently.

You May Also Like:  How to Securely Attach a Kitchen Island to the Floor: Tips and Tricks


Removing glued mirrors can be a tedious, time-consuming, and sometimes dangerous task. However, there are various methods that can make the process smoother without causing any harm to yourself or the mirror. From using chemical solvents to applying heat, each method has its own pros and cons.

It is crucial to choose the right method depending on the type of glue used, the adhesive strength, and the size of the mirror. Additionally, it’s important to focus on safety precautions while removing the mirror to avoid any accidents.

With patience and care, you can successfully remove the glue residue and enjoy a clean, adhesive-free surface. We hope this step-by-step guide has helped you in your mirror removal journey and wish you all the best in your diy endeavors.