How to Tow a Zero Turn Mower?

Assuming you would like tips on how to tow a zero turn mower: 1. Check your owner’s manual. Some manufacturers have specific instructions on how to properly tow their mower.

2. Don’t exceed the maximum towing speed, which is typically around 5 mph. 3. Be sure to use proper safety chains or straps when attaching the mower to your vehicle. This will help prevent it from becoming detached and possibly causing an accident.

4. Avoid making sudden stops or turns while towed – this can cause the mower to tip over. 5. If possible, position the mower so that the wheels are off the ground while being towed.

  • Assuming you are wanting to know how to tow a zero turn mower with a tractor: 1
  • First, back the tractor up to the mower making sure that the hitch is lined up with the ball hitch on the back of the mower
  • Next, put the tractor in neutral and set the parking brake
  • Then, attach the chains or straps from the tractor to the loops on either side of the mower deck
  • Make sure they are tight and secure
  • Finally, very slowly and carefully drive forward until the mower is being pulled by the tractor
  • Be careful not to go too fast or make any sudden movements as this could damage both the tractor and mower


How to tow a lawn mower

Can I Pull a Zero Turn Mower?

Yes, you can pull a zero turn mower with a vehicle. There are a few things to keep in mind when doing so, however. First, make sure that the mower is in neutral and the brakes are disengaged.

You’ll also want to attach the mower to the vehicle with a tow strap or rope. And finally, be sure to drive slowly and carefully when pulling the mower, as sudden stops can cause damage to both the mower and the vehicle.

You May Also Like:  How Many Romex Wires Can Be Bundled Together?

What Happens If You Tow a Zero Turn Mower?

There are a few things that could happen if you tow a zero turn mower. The first is that the wheels on the mower could get damaged from being towed. This is because the weight of the mower can put stress on the wheels and cause them to become bent or broken.

Additionally, the blades on the mower could also get damaged from being towed. This is because they are designed to cut grass and not be towed behind a vehicle. Finally, the engine on the mower could overheat from being towed.

This is because it is not designed to run for an extended period of time without cooling down.

How Do You Put a John Deere Zero Turn Mower in Neutral?

Assuming you have a John Deere zero turn mower with a Kohler engine, there are only a few steps to follow to put your mower in neutral. First, set the Parking Brake by depressing the brake pedal all the way down. With your right foot, push down on the PTO switch to disengage the blades.

Then, move the transmission control lever to the “neutral” position. Your mower is now in neutral and can be started without engaging the blades.

Can You Put a Zero Turn in Neutral?

Yes, you can put a zero turn in neutral. This is done by disengaging the transmission, which can be accomplished by either moving the shifter into the neutral position or by pulling the transmission lever (if so equipped). Once in neutral, the machine can then be pushed or pulled without engaging the drive train.

How to Tow a Zero Turn Mower?


How to Put a Zero Turn Mower in Neutral

If you’re like most people, you probably don’t think about how to put a zero turn mower in neutral very often. But if you find yourself in a situation where you need to do this, it’s important to know how. Here’s a step-by-step guide:

You May Also Like:  How Can I See Where Pipes are behind the Wall?

1. Start by turning off the engine. This is obviously an important safety precaution. 2. Next, locate the transmission control lever.

On most zero turn mowers, this will be located on the right side of the seat near your right leg. 3. Once you’ve found the transmission control lever, pull it back towards you until it clicks into place. This will put the transmission into neutral mode.

4. Finally, start the engine back up and continue using the mower as normal. Keep in mind that putting the transmission into neutral mode will disable some of the mower’s features, such as its ability to self-propel forwards or backwards. So if you need to move the mower around for any reason, you’ll have to do it manually.


If you’re looking to tow your zero turn mower, there are a few things you need to know. First, you’ll need to find a hitch that’s compatible with your mower. Next, you’ll need to attach the hitch to the mower and make sure it’s secure.