How to Neutralize a Gravely Zero Turn Mower: A Comprehensive Guide

To put a gravely zero turn mower in neutral, first, push the parking brake lever down and disengage the blades. Then, move the throttle control to the “slow” position.

Once done, the mower will be in neutral. Gravely zero turn mowers are famous for their efficiency and ease of use. However, it can be a bit tricky to put them in neutral if you are not familiar with the process. Putting the mower in neutral is necessary for loading or off-loading it from a trailer or moving it around a tight spot. If you’re not sure how to do it, don’t worry, it’s a straightforward process, and we’re here to guide you with step-by-step instructions. In this article, we’ll walk you through the process of putting a gravely zero turn mower in neutral, so you can do it with ease. So, let’s get started!

How to Neutralize a Gravely Zero Turn Mower: A Comprehensive Guide

Credit: www.yumpu.com

Understanding The Importance Of Putting A Gravely Zero Turn Mower In Neutral


Neutralizing your gravely zero turn mower is crucial for several reasons. Firstly, it prevents the machine from accidentally starting or rolling away when you’re performing maintenance. Moreover, while in motion, putting the mower in neutral allows you to move backward and forward without damaging the machine.

To put the gravely zero turn mower in neutral, locate the control arm on the left-hand side of the seat and pull it outward. This will disengage the transmission’s hydraulic pumps and free the machine to move around. Before starting any maintenance work, make sure to securely fasten the mower by engaging the brake and setting the parking brake.

You May Also Like:  Why So Many John Deere Ignition Switches Failing? Find Out Now.

Following these safety measures will ensure your gravely zero turn mower runs smoothly and lasts longer.

Identifying The Neutral Gear And Levers On A Gravely Zero Turn Mower


Operating a gravely zero turn mower efficiently necessitates understanding how to place it in neutral. To locate the neutral gear, begin by identifying the levers on the mower. There are two levers on either side of the driver’s seat. After locating the levers, the next step is to comprehend the neutral position.

The detent in the middle of the two levers indicates the mower’s neutral position. Finally, there are various types of levers, including traditional lap bar levers and joystick-style levers, which give the operator a more comfortable grip. Knowledge of these specifics aids in operating a gravely zero turn mower.

How to Remove a Lawn Mower Deck | Gravely®


Steps To Put A Gravely Zero Turn Mower In Neutral


Putting a gravely zero-turn mower in neutral is important when we need to move it manually or when there’s a mechanical issue. Follow these simple steps to achieve that. Firstly, make sure the mower is in a stationary position. Then, depress the brake pedal fully with your left foot.

Next, move the handles on both sides to the neutral position. Now, release the brake pedal slowly. Finally, confirm the mower is in neutral by seeing if it rolls freely. To neutralize the mower, try to use the brake pedal rather than the handles.

It makes the process much easier and quicker. Remember, always refer to the owner’s manual for guidance and safety information.

Common Mistakes To Avoid While Neutralizing The Mower


Putting a gravely zero turn mower in neutral is essential for safety reasons. Common mistakes to avoid include overlooking safety measures and confusing neutral with park. To ensure safety, always engage the parking brake, turn off the blades, and lower the deck.

Additionally, before switching gears, make sure the mower is on level ground and ensure the engine is at idle. Moreover, it’s important to avoid sudden movements with the mower, which can lead to accidents. By following these simple tips, you can ensure a safe and efficient operation of your gravely zero turn mower.

You May Also Like:  Will Grass Clippings Prevent Weeds? The Truth Unveiled.

Troubleshooting Neutralization Issues With Gravely Zero Turn Mower


If you’re experiencing issues with your gravely zero turn mower’s neutralization, fret not. First, identify common issues, such as damaged seat switch or disconnected wiring. Secondly, try a few simple solutions to rectify the problem. For instance, inspect the mower’s seat switch connections or check if the blades are correctly disengaged.

Avoid operating the mower if you suspect that its neutralization is malfunctioning. Choose a flat and level surface, and put the mower in neutral before you begin working on it. By following these troubleshooting steps, you can fix your gravely zero turn mower’s neutralization problems and get back to your lawn-mowing tasks in no time.

Conclusion


Now that you know how to put a gravely zero turn mower in neutral, you’ll be able to easily perform maintenance and maneuvering tasks without worrying about the blades engaging accidentally. Remember to always ensure the engine is off before attempting to put the mower in neutral mode.

With this simple understanding of the mower’s mechanisms, you can enjoy a smooth, efficient, and safe mowing experience. It’s important to always follow the manufacturer’s guidelines and instructions for proper usage and maintenance of your gravely mower. By doing so, you’ll extend the lifespan of the machine and get the most out of your investment.

So, next time you need to put your gravely zero turn mower in neutral, you’ll know exactly what to do. Happy mowing!