There are a few things you need to do in order to turn on your Stihl weed eater. First, make sure that the gas and oil are mixed together in the proper ratio. Next, locate the choke lever and move it to the “on” position.
Finally, pull the starter cord until the engine starts.
- Open the fuel cap and fill the tank with a high-quality 2-cycle engine oil mixed with unleaded gasoline
- Turn the choke knob to the “run” position
- Press and hold the primer button until it fills with gas, then release it
- Pull cord slowly until resistance is felt, then pull rapidly to start engine
Contents
How to Start: FS 38 | STIHL Tutorial
How Do You Turn a Stihl On?
Assuming you are talking about a Stihl chainsaw, the process is actually pretty simple. There are just three steps:
1. Make sure the saw is in the “off” position.
This means that the switch should be in the middle position.
2. Pull the cord all the way out until it locks into place.
3. Push the cord back in until it engages the engine.
How Do You Start a Stihl Weed Wacker?
In order to start a Stihl weed wacker, you will need to first make sure that the machine is properly fueled. You will need to mix together 2.6 ounces of oil with 1 gallon of gas in order to create the proper fuel mixture for your Stihl weed wacker. Once the fuel mixture has been created, you can then proceed to fill up the tank on your Stihl weed wacker.
After the tank has been filled, you will need to prime the carburetor on your Stihl weed wacker by depressing the primer bulb 3-5 times. Once the carburetor has been primed, you can then pull out on the starter cord in order to start up your Stihl weed wacker.
Which Way is on on a Stihl Weed Eater Switch?
Assuming you are referring to the on/off switch, it is located on the right side of the weed eater near the handle. To turn on the weed eater, simply push the switch up.
How Do You Start a Stihl Gas Trimmer?
If you’re looking to start a Stihl gas trimmer, the process is actually quite simple. In this blog post, we’ll walk you through the steps necessary to get your new trimmer up and running.
First, make sure that you have all of the necessary tools and materials on hand.
You’ll need the trimmer itself, of course, as well as a tank of unleaded gasoline and a pair of gloves. You’ll also need a Phillips head screwdriver and a spark plug wrench.
Once you have everything gathered together, it’s time to begin assembly.
Start by attaching the handlebar to the main body of the trimmer using the screws provided in the hardware kit. Next, add fuel to the tank – be sure not to overfill it! – and then screw on the gas cap.
Now it’s time to prepare the spark plug for installation. First, remove any debris or dirt that may be on it using a wire brush or similar tool. Next, use your spark plug wrench to unscrew the old spark plug from the engine (counterclockwise).
Install the new spark plug by screwing it in clockwise until it’s snug – don’t overtighten! Finally, reattach any covers or guards that were removed during assembly.
With everything in its place, go ahead and give your Stihl gas trimmer a test run!
Credit: www.stihlusa.com
Stihl Weed Eater on off Switch Position
If you’re like most people, you’ve probably had some experience with a weed eater. Whether it was using one at your home or rental property, chances are you remember the on/off switch being in a different position than other power tools. So why is the on/off switch on a Stihl weed eater in a different position?
The answer is actually quite simple. The on/off switch on a Stihl weed eater is located in the front of the tool, near the trigger. This placement is intentional and designed for safety reasons.
When operating a weed eater, your hands are often close to the spinning cutting head. If the on/off switch were located in the back of the tool, it would be easy to accidentally turn off the power while working. However, by placing it in front near the trigger, it’s much more difficult to accidentally turn off mid-use.
So next time you pick up a Stihl weed eater, don’t be surprised by its unique on/off switch placement – it’s there for your safety!
Conclusion
Stihl weed eaters are a great addition to any lawn care arsenal, but they can be tricky to start. This helpful guide will walk you through the process of starting your Stihl weed eater so you can get to work quickly and easily.