Custom cycle can be found on most newer Maytag washers. To use this feature, simply select the custom setting on the dial. Then, choose the soil level, water temperature, and spin speed that you desire.
After your selections have been made, just press start and your load will begin washing according to your specifications!
- Open the washer door and locate the cycle selector knob on the control panel
- Turn the knob to the “Custom” setting
- Press the start button
- The washer will begin to fill with water
- Once the washer is full, it will agitate for a few minutes before draining
- After it drains, the washer will fill again and this time it will rinse your clothes with clean water
- 6 Finally,the washer will spin your clothes to remove any excess water before stopping automatically
Contents
Maytag Washing Machine Cycles How To Use Tutorial
How Do I Reprogram My Maytag Washer?
If your Maytag washer isn’t working properly, you may need to reprogram it. Here’s how to do it:
1. Unplug the washer from the power outlet.
2. Remove the control knob by pulling it straight off the front of the control panel.
3. Use a small screwdriver to remove the two screws that secure the control panel to the washer cabinet.
4. Carefully lift off the control panel and set it aside.
5. Locate the wiring harness that connects the main control board to the user interface board. There is a white connector on each end of this harness.
6. Disconnect and then reconnect each end of this harness firmly into its respective connector on each board.7
What is the Quickest Cycle on a Maytag Washing Machine?
If you’re looking for the quickest cycle on a Maytag washing machine, you’ll want to choose the Speed Wash cycle. This cycle is designed to get your clothes clean quickly, and it’s the shortest cycle offered by Maytag. The Speed Wash cycle typically takes about 30 minutes to complete.
Is There a Quick Wash Option on Maytag Washer?
Yes, there is a quick wash option on Maytag washer. This option is best used when you need to clean a small load of laundry quickly. The quick wash cycle is shorter than the regular cycle and uses less water.
What is Delicate Cycle on Maytag Washer?
If you have a Maytag washer, you may be wondering what the delicate cycle is for. This cycle is designed for laundry that needs to be washed in a gentle manner. This could include items like lingerie, delicates, or baby clothing.
The delicate cycle will use less agitating washing motions and a lower water level than the other cycles on your washer. You may also want to use a gentle detergent when using this cycle.
Credit: www.consumerreports.org
How to Use Maytag Washer Front Load
If you have a Maytag washer front load, you may be wondering how to properly use it. Here are some tips on how to get the most out of your machine:
– Always consult your owner’s manual before using any new appliance.
This will ensure that you are using it correctly and safely.
– When loading your washer, be sure to evenly distribute the laundry items around the drum. This will allow for more efficient washing.
– Be sure to select the correct cycle and settings for your load type. The wrong settings can damage clothing or cause excessive wear and tear on your machine.
– After each wash cycle, promptly remove your laundry from the washer to prevent wrinkling or musty smells.
Conclusion
If your clothes come out of the wash still smelling bad or feeling dirty, you may need to clean your washer. To clean a top-loading washer with a custom cycle, start by adding 1 quart of white vinegar to the water. Then, add 1 cup of baking soda and run the cycle on the hottest setting.
After the cycle is complete, wipe down the inside of the washer with a damp cloth. You should also clean the detergent dispenser by removing it and scrubbing it with soapy water.