LC1 on a Samsung washing machine indicates that there is a problem with the water level sensor. This can happen if the sensor is dirty or there is something blocking it from working properly.
If you’re like most people, you probably have a lot of questions about your washing machine. One of the most common questions is “What does LC1 mean on a Samsung washer?”
LC1 is an error code that indicates that the washer’s child lock is engaged.
The child lock is a safety feature that prevents children from opening the washer door and injuring themselves.
To turn off the child lock, simply press and hold the button for three seconds. Once the child lock is disengaged, you’ll see a green light on the control panel.
Contents
How to Fix Lc1 Error Code on Samsung Washer
If your Samsung washer is displaying the error code LC1, it means that there is a problem with the water level sensor. This can be caused by a number of things, such as a blockage in the sensor’s tube or a faulty pressure switch. In most cases, you’ll be able to fix the problem yourself without having to call a service technician.
To start, make sure that there is nothing blocking the water level sensor’s tube. This could be something as simple as lint or dirt build-up. If the tube is clear, then check the pressure switch for any signs of damage.
You can test the switch by disconnecting it from the control board and jumpering across the two terminals. If the switch is working properly, you should hear a click when you do this.
If neither of these solutions fixes the LC1 error code on your Samsung washer, then you will need to replace either the water level sensor or pressure switch (or both).
These parts are not very expensive and can be easily obtained from an appliance parts store. With a little bit of patience and some basic handyman skills, you should be able to get your washer up and running again in no time!
Credit: all-errors.com
How Do I Fix the Lc1 Error on My Samsung Washing Machine?
If your Samsung washing machine is displaying the LC1 error code, it means that there is a problem with the water inlet. This can be caused by a number of things, such as a blockage in the hose or a problem with the valve.
Here are some steps you can take to try and fix the LC1 error:
1. Check the water inlet hose for any kinks or blockages. If there is anything blocking the flow of water, remove it and see if that fixes the problem.
2. Make sure that the water inlet valve is turned on all the way.
Sometimes this can become loose over time and may not be letting enough water into the washing machine. Turn it on as far as it will go and see if that solves the issue.
3. If neither of these solutions work, you may need to call a technician to come and take a look at your washing machine.
How Do I Reset My Samsung Lc1 Washer?
If your Samsung LC1 washing machine isn’t working properly, you may need to reset it. Here’s how to do so:
1. Unplug the washing machine from its power source.
2. Press and hold the “Start/Pause” button for three seconds.
3. While holding the “Start/Pause” button, plug the washing machine back in to its power source.
4. Release the “Start/Pause” button after three seconds.
The washing machine will now be reset and should work properly again.
What Does Lc1 Mean?
In business, LC1 is short for Letter of Credit Number 1. It’s a reference number given to the first letter of credit issued by a bank in connection with a particular transaction. The term is also used in accounting to refer to the current portion of long-term debt that’s due within one year.
What Does Lc Mean in Washer?
An LC code on a washer typically means that the machine is leaking water. The most common cause of this is a faulty door seal or gasket. If you see an LC code, it’s important to check for leaks around the door and have the seal repaired or replaced if necessary.
How to fix Samsung washer error code LC1 and 1LC1
Conclusion
LC1 on a Samsung washer means that the machine is locked. This can happen for a variety of reasons, such as if the washer is not properly installed or if there is an issue with the door. If your washer is displaying this error code, you will need to consult your owner’s manual for instructions on how to unlock it.