If your Samsung washer is displaying the 4C error code, this means that the child lock feature is enabled. To disable the child lock and reset the washer, do the following:
1. Press and hold the START/PAUSE button for 3 seconds.
2. The display should now read “CHILD LOCK OFF”.
3. Press the START/PAUSE button to begin a new cycle.
Contents
How to Fix 4C or 4E Error on your Samsung Washing Machine
- Unplug your Samsung washing machine from the power outlet
- Find the control panel on your machine and locate the “4C” code button
- Press and hold the “4C” code button for three seconds, then release it
- Plug your machine back into the power outlet and select a new cycle on the control panel to reset the washer
Samsung Washer 4C Error Code
If your Samsung washer is displaying the error code 4C, it means that there is a problem with the water inlet. This can be caused by a number of things, such as a clogged water filter or a blocked hose. Whatever the cause, you’ll need to troubleshoot and fix the issue before your washer will work again.
Here are some tips for troubleshooting a Samsung washer with an error code 4C:
– Check the water inlet hose for any kinks or blockages. If the hose is damaged or clogged, replace it.
– Clean the inlet water filter. A clogged filter can restrict water flow and cause an error code 4C.
– Make sure that there is nothing blocking the path of the water inlet valve.
If something is preventing the valve from opening fully, it could restrict water flow and trigger an error code.
Samsung Washer 4E Code But Full of Water
If your Samsung washer is displaying the 4E error code, it means that there is water in the washing machine even though it shouldn’t be. This can happen for a few different reasons. One possibility is that the door isn’t sealing properly, allowing water to leak in.
Another possibility is that the drain hose is clogged or blocked, preventing the water from draining out.
If your washer is full of water and displaying the 4E error code, you’ll need to empty it out before proceeding. To do this, unplug the washer and remove the drain hose from the back.
Place the end of the hose into a bucket and turn on the washing machine. The water should start draining out into the bucket. Once it’s empty, reattach the drain hose and plug in the washer.
Try running a cycle again to see if it works properly now.
Samsung Washer 4C How to Turn off
If your Samsung washer has a “4C” error code, it means there is a problem with the water supply. To fix this, you will need to turn off the water supply to your washer. Here’s how:
1. Locate the main water shut-off valve for your home. This is usually located in the basement or utility room.
2. Turn off the water supply by turning the valve clockwise until it stops.
3. Once the water is turned off, unplug your washer from the power outlet and wait 30 minutes before plugging it back in and restarting your wash cycle.
Samsung Washer 4C Code Reddit
If you have a Samsung washer and you see the 4C code, it means that the washer is not draining properly. This can be caused by a few different things, but the most common cause is a clogged drain hose. To fix this, simply unplug the washer and remove the drain hose from the back of the machine.
Then, clear any debris that may be blocking the hose and reattach it. Once you’ve done this, your washer should be good as new!
How to Clear 4E Code on Samsung Washer
If your Samsung washer is displaying the error code 4E, it means that there is a water inlet problem. The first thing you’ll want to do is check the hoses and make sure they are properly connected. If everything looks good there, then you’ll need to clean the inlet filters.
To do this, unplug the washer and remove the hose from the back of the machine. There will be a small screen filter that can be removed and cleaned with soapy water. Once you’ve done that, reattach the hose and plug your washer back in.
Hopefully that will clear the error code and get your machine up and running again!
Credit: www.youtube.com
How Do I Clear the 4C Error on My Samsung Washer?
If you have a Samsung washer and you’re getting the 4C error code, don’t worry. This is a very common error code that can be easily fixed. Here’s what you need to do:
1. First, make sure that the washer is properly plugged into an outlet. If it’s not, plug it in and try again.
2. Next, check the water supply lines to make sure they’re not kinked or blocked.
If they are, straighten them out or clear the blockage and try again.
3.If those two things don’t fix the problem, then the most likely cause is a faulty water inlet valve. This part is located behind the control panel on your washer.
You’ll need to remove the panel to access it. Once you do, check to see if there’s any debris or buildup around the valve itself. If so, clean it off and try again.
Why Does My Samsung Washing Machine Keep Saying 4C?
If your Samsung washing machine is repeatedly displaying the “4C” error code, it means that there is a problem with the water temperature sensor. This sensor monitors the water temperature inside the washer drum and sends a signal to the main control board to let it know when the water has reached the correct temperature. If the sensor isn’t working properly, it can cause the washing machine to think that the water is too cold – even when it’s not – and display the “4C” error code.
There are a few things that can cause this problem:
– The water temperature sensor itself may be faulty and need to be replaced.
– The wiring between the water temperature sensor and the main control board may be loose or damaged, causing an intermittent connection.
This can be fixed by checking all of the wiring and making sure it’s securely connected at both ends.
– There may be something blocking or interfering with the water temperature sensor, such as lint build-up around it. Cleaning away any debris should fix this issue.
If you’re not comfortable troubleshooting and repairing this problem yourself, you’ll need to call a qualified appliance repair technician to take a look at your washing machine and diagnose the issue.
How Do I Reset the Code on My Samsung Washing Machine?
If you need to reset the code on your Samsung washing machine, there are a few different ways to do so. The first way is to simply unplug the machine from the power outlet for 30 seconds. This will reset the machine and clear any error codes.
If this does not work, you can also try pressing and holding the ‘Start/Pause’ button for 5 seconds. This should also reset the machine and clear any error codes. If neither of these methods work, you will need to contact Samsung customer service for further assistance.
Conclusion
If your Samsung washing machine is displaying the 4C error code, it means that the door lock is not functioning properly. To reset the error code, you will need to open the door and close it again. If the problem persists, you may need to replace the door lock assembly.